There is an outage on our network for the region of Antwerp & Limburg. All services of edpnet are down. We are currently investigating the origin of the problem. We will give you more feedback soon.
Due to a power outage in our co-location for region of Antwerp, connections for Antwerp, Limburg and parts of Flemish Brabant en East-Flanders were disrupted. These connections came back online when the power was restored.
Our apologies for the inconvenience.
There was a short outage on our network for the regions East- and West-Flanders, this afternoon at 13h35 until 13h50. Since last night the old line (or our former supplier) has an outage due to a broken network card. No problem for our customers, as our fiber backup took over and all internet traffic was redirected.
This afternoon the old supplier replaced the broken card. Our new Cisco backup equipment detected this hardware replacement and made a wrong reaction on the backup/reroute. Our NOC team is investigating with Cisco engineers why the new equipment made this ‘wrong’ detection.
Meanwhile to avoid this, our NOC team deactivated manually the old line/former supplier. In this case further interventions/changes on the former suppliers network can not intervene our backup/reroute.
Our apologies for the inconvenience.
There is currently an outage in East- and West-Flanders
impacting internet and telephony services. Edpnet is trying to solve this as fast as possible.
We’ll let you know as soon as any ETR is available. Sorry for the inconveniences caused.
Update 16/10/2013 12:54: Our local supplier is working on identifying the problem. We’ll keep you informed of any new information on this matter. Sorry again for the inconveniences.
Update 16/10/2013 13:05: The fault is detected: there’s a major fiber cut between Gent and Brussels. No ETR available yet, we’re cheching it with our supplier.
Update 16/10/2013 13:43: The fiber cut is finally located. We expect the splicers to arrive on location at 14:15. We’ll keep you up to date with the progress of the works and we’ll let you know the final ETR once it’s available. We apologize again for the inconvenience and thank you for your understanding.
Update 16/10/2013 14:48: The splicers are working on the issue now. Unfortunately, we still cannot provide you with a confirmed repair time. We’re monitoring the situation and will update you soon.
Update 16/10/2013 15:40: The problem seems to be quite complicated to solve, there’s almost a hundred of fiber pairs to be spliced. The ETR for the moment is around 18:00. We’ll let you know once it’s confirmed.
Update 16/10/2013 17:10: The splicing works are still ongoing. The ETR remains the same, we expect the issue to be solved at around 18:00. We’ll keep you posted.
Update 16/10/2013 18:24: The splicing works are still ongoing, got confirmation that first fibers are getting online, ours isn’t online yet. We’ll keep you posted.
Update 16/10/2013 19:42: Everything seems to be up and running again!
Thanks to everybody for your patience and understanding, we hope our next blog post will be about the new fibers being up!
Momenteel is toegang tot bepaalde sites moeilijk tot niet mogelijk. Edpnet is zich hiervan bewust en we zijn traffiek aan het herrouteren. We trachten dit binnen het komende uur opgelost te krijgen.
Onze excuus voor het ongemak.
Some sites have bad reachability or not reachable at the moment.This is known problem at EDPnet , we are trying to reroute traffic. We suspect it will be done within a hour.
Our apologies for any inconvenience
There is a maintenance scheduled impacting all of Belgium.
During the maintenance all edpnet services (DSL, VoIP, …) will be impacted.
Maintenance window: 02:00 – 06:00
Downtime: ~30 minutes We advice you to restart your modem/router after the maintenance has been completed. Edpnet apologizes for any inconveniences.
The first stage of this maintenance was successfully done. All the edpnet services are up. There will be the second maintenance to plan soon. As soon as we know an exact date we will keep you posted.